The DT1100 unit is used for the production of draw-tape bags. The unit includes two driven unwinds for cross wound 25 mm or 100 mm pancake wound spools. Hole punch is standard 40 mm and optional sizes are 70 or 84 mm. Standard equipped with an edge guide and hot sealing bars for hem sealing. Easy to operate and maintain, the DT1100 gives you a reliable long lasting production of draw-tape bags.

Download product sheet

Technical data
Web width, max, mm [in]
Draw-tape reel 25 mm [1.0 in]
Draw-tape reel 100 mm [3.9 in]
Hole punch std/opt, mm
Machine speed, max, m/min [fpm]*
Hole punch cycles/min
Installed power, kW [A]
Main power
Air supply, bar [psi]
L x W x H, mm
L x W x H, [in]
Weight, kg [lbs]
1140 [44.9]
W 400 mm/Ø 600mm [W 15.7 / Ø 22.6]
W 100 mm/Ø 800mm [W 3.9 / Ø 31.5]
40/70/84
120 [394]
300
6 [8.7]
See bottom page
6 [87 at 15 scfm]
4500 x 2000 x 2150
[177 x 79 x 85]
1650 [3638]
Web width, max, mm [in]
Draw-tape reel 25 mm [1.0 in]
Draw-tape reel 100 mm [3.9 in]
Hole punch std/opt, mm
Machine speed, max, m/min [fpm]*
Hole punch cycles/min
Installed power, kW [A]
Main power
Air supply, bar [psi]
L x W x H, mm
L x W x H, [in]
Weight, kg [lbs]
1140 [44.9]
W 400 mm/Ø 600mm [W 15.7 / Ø 22.6]
W 100 mm/Ø 800mm [W 3.9 / Ø 31.5]
40/70/84
120 [394]
300
6 [8.7]
See bottom page
6 [87 at 15 scfm]
4500 x 2000 x 2150
[177 x 79 x 85]
1650 [3638]

* Mechanical. Max production speed depending on the quality (i.e. thickness, number of layers etc) of material to be converted.
Mainpower. All units mainpower 380–420V +10%/-15%, for temporary power surge, 16A, 3phases, 50Hz, ground and neutral.
All technical data are subject to change without prior notice.